The new dimension in travel document laminating. Laminating system for passports.
The DILETTA CPL180HD internal structure has been designed to realize a compact size and full front operation. It requires only a limited installation space - Allowing it to be installed freely. By specially designing the internal structure it has been possible to incorporate the functions in a compact and simple square sheet form, without wasting space. In addition full front operation allows convenient handling of passports.
The CPL180HD has a pre-set laminating temperature and speed, adjusted to specific applications and non accessible for operators to avoid bad end results. Temperature as well as speed is very stable during the entire laminating process. Perfect end-result is guaranteed.
The Temperature Sensor is integrated in the heating element and constantly measures the exact temperature of the heating elements. It feeds the controller board with very accurate information about the heating. Hence, the PCB is capable of constantly sending small adjustments to the heating making sure the system delivers constant laminating temperature throughout the entire process.
The DILETTA CPL180HDF laminator comes with an integrated auto feeder for passports. It can load up to:
The DILETTA CPL180HDS laminator comes with an integrated auto stacker and a detachable passport hopper for passports. The hopper can load up to:
The DILETTA CPL180HDFS laminator comes with an integrated auto feeder, an integrated auto stacker and a detachable passport hopper for passports. For load capacities please refer CPL180HDF and CPL180HDS.
|Configuration||DILETTA CPL 180 HD|
|Width x Depth x Height||398 x 245 x 147 mm³|
|Weight||approx. 10.7 kg|
|Laminating Temperature Range||up to 190 °C|
|Width||max. 130 mm|
|Thickness||max. 64 pages|
|Laminating time (MRP) 1)||approx. 18 - 100 sec. 1)|
|Stand-by||30 dB (no noise emission)|
|Temperature||5 to 35ºC (41 to 95ºF)|
|Humidity||10 to 90% RH with no cond.|
|Voltage||100 - 240 VAC, 50 / 60Hz|
|Stand-by (non-heating)||1.6 W|
1) Lamination time depends on activation time of hot adhesive and penetration time of cover and paper.
Design and specifications are subject to change without notice.
DILETTA does not assume any liability for completeness or accuracy in form and contents.
For more information, e-mail us at email@example.com.